How to mount drive in /media/userName/ like nautilus does using udisks

Update: Ubuntu 16.04+ includes a utility called disks; search it in dash. It's a GUI for mounting/handling disks. I'm using this tool for mounting or hiding drives.

In my current installation of Ubuntu 13.10 Unity, when I click on a drive in nautilus it gets mounted on /media/username/mountedDrive

I read that nautilus uses udisks to do that. Basically I want to auto mount my drive using udisks in start up using this method

The problem is, it mounts the drive in /media/mountedDrive, but I want it the way nautilus does in /media/username/mountedDrive

I want my NTFS Data drive to be auto mounted at /media/bsienn/

$ blkid
/dev/sda1: LABEL="System Reserved" UUID="8230744030743D6B" TYPE="ntfs"
/dev/sda2: LABEL="Windows 7" UUID="60100EA5100E81F0" TYPE="ntfs"
/dev/sda3: LABEL="Data" UUID="882C04092C03F14C" TYPE="ntfs"
/dev/sda5: UUID="8768800f-59e1-41a2-9092-c0a8cb60dabf" TYPE="swap"
/dev/sda6: LABEL="Ubuntu Drive" UUID="13ea474a-fb27-4c91-bae7-c45690f88954" TYPE="ext4"
/dev/sda7: UUID="69c22e73-9f64-4b48-b854-7b121642cd5d" TYPE="ext4"
$ sudo fdisk -l
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders, total 312500000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8d528d52 Device Boot Start End Blocks Id System
/dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sda2 206848 117730069 58761611 7 HPFS/NTFS/exFAT
/dev/sda3 158690072 312494116 76902022+ 7 HPFS/NTFS/exFAT
/dev/sda4 117731326 158689279 20478977 5 Extended
/dev/sda5 137263104 141260799 1998848 82 Linux swap / Solaris
/dev/sda6 141262848 158689279 8713216 83 Linux
/dev/sda7 117731328 137263103 9765888 83 Linux
Partition table entries are not in disk order
$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda7 during installation
UUID=69c22e73-9f64-4b48-b854-7b121642cd5d / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=8768800f-59e1-41a2-9092-c0a8cb60dabf none swap sw 0 0

3 Answers

The accepted answer does not really answer the question, namely how to mount and unmount hard drives using udisks like Nautilus does when clicking on a disk. The command you are looking for is udiskctl.

It's super easy, and also works with encrypted disks!

Mounting (encrypted disk):

Unlock the disk:

$ udisksctl unlock -b /dev/sdb1
Unlocked /dev/sdb1 as /dev/dm-3.

Take note of the location of the unlocked device (here /dev/dm-3). Then mount it automatically:

$ udisksctl mount -b /dev/dm-3
Mounted /dev/dm-3 at /media/jmiserez/samsung1000.

Unmounting (encrypted disk):

$ udisksctl unmount -b /dev/dm-3
Unmounted /dev/dm-3.
$ udisksctl lock -b /dev/sdb1
Locked /dev/sdb1.

For unencrypted disks, just leave out the lock/unlock command in the beginning and end.

As you can see except for /dev/sda5 as well as /dev/sda7 there is no entry of other partitions in /etc/fstab. You can manually mount your partitions by following these steps.

• First of all unmount all partitions before creating an entry point to /etc/fstab. You can use command: sudo umount /dev/sdaX. Replace X with the partition number you want to unmount. Best way to unmount all is to use this command:

  sudo umount -a

• Since you want to mount your partition at /media/user/mount-drive; you have to create the mount-point where you want to mount the partitions. Thus you've to create directories there in order to mount the partitions. Execute following in terminal to make the directories(mount point):

  sudo mkdir /media/user/sda1 /media/user/sda2 /media/user/sda3 /media/user/sda6

  Replace user with your ubuntu user's name. i,e bsienn I think.

• Now you have to make changes in /etc/fstab in order to mount your all partitions. Execute following commands to do so:

  sudo cp /etc/fstab /etc/fstab.orginal
  sudo nano /etc/fstab

  go to the last line and add these lines:

  UUID=8230744030743D6B /media/user/sda1 ntfs errors=remount-ro 0 1
  UUID=60100EA5100E81F0 /media/user/sda2 ntfs errors=remount-ro 0 1
  UUID=882C04092C03F14C /media/user/sda3 ntfs errors=remount-ro 0 1
  UUID=13ea474a-fb27-4c91-bae7-c45690f88954 /media/user/sda6 ext4 errors=remount-ro 0 1

  again replace user in /media/user/sdaX with your ubuntu account name.

  _{A little explanation: UUID="contains the ID of your hard disk partitions, 1st is of /dev/sda1 and 2nd is of /dev/sda2 partitions and so on. sudo blkid command is very useful to get the partitions information like UUID, File-system type, partition entry etc.. So any one can use it to get their information. /media/user/sda1 is the mount entry of 1st partition and so on. Remember why I created 4 directories above. ntfs is the file system type of your 1st partition: /dev/sda1. It may be something else also like: ext3, ext4, ntfs, fat etc, you can get the info from sudo blkid command as I mentioned above. others will be same for all types of file-system, it tells that if any error occurs then remount the file system in read-only mode this link is a great tutorial.}

  press Ctrl+x to save and exit. Press y when prompt to save.

• Now mount all partitions by executing this command:

  sudo mount -a

  If you want to mount any specific partition you can use: sudo mount /dev/sda1 i,e to mount first partition and so on.

Now all your partitions will be mounted automatically when ever you start your system. You can check it by restart your system. :)

Reply if you need further assistance or if something goes wrong.

Edit

I forgot to saw the picture, actually you can create the folder name under /media/bseinn/ the name you want. For example /media/bseinn/data can be created instead of /media/bseinn/sda3; similarly /media/bseinn/ubuntudrive can be created instead of /media/bseinn/sda6. You've to give the same name in /etc/fstab file. Hope you can understand.

Mount by label, without root password, with udisksctl and the label of the partition. Example with a partition named Games:

udisksctl mount -b /dev/disk/by-label/Games

Use ls to get the labels:

ls /dev/disk/by-label